PUPACAMP STANLEY LUNCH BOX 9.4L Hanger Kit

The STANLEY LUNCH BOX 9.4L body is not sold.

It was planned with the special environment of ``drinking coffee only outdoors in a small LUNCH BOX'' as the top priority.
This is a hanger kit exclusively for STANLEY LUNCH BOX.

This is a kit that can be attached to the table top as a pole stand with two tiers of dripper plates, a bridge hanger for hanging accessories, and even the lantern that was used.

Made of high quality birch wood and finished with an oil stain, the unique color is in perfect harmony with LUNCHBOX.
All parts are finished with a UV coating, assuming they will come into contact with water and heat.
It does not easily deform, and will not leave burn marks even if you place a gas can or heated kettle on it.

Both bolts and nuts are made of brass, achieving a high-class quality down to the smallest detail.

Since the lantern is attached to a pole, it is compatible with products from various manufacturers.
All products with compatible 1/4 brackets such as 38explore, Lumena, and cargo containers are compatible.
The Goalzero lantern does not have a built-in bracket, so it can be installed using a Goalzero-specific lantern cap. It doesn't matter whether there is a magnet or not.

The top plate is a roll type.
It can be rolled up and stored when not in use.
The bottom is embossed for stability, and 14 magnets are attached to the grooves to prevent movement.

The leather handle and strap are in the color closest to the kit color.
There is no difference between the lunch box and the kit.
The leather handle is a necessary part to keep the lid and body level when the lunch box is fully opened.

• dripper guard

This part prevents the dripper from entering deeply into the cup or server when using a dripper that is slightly smaller than a regular dripper.
Manufactured based on ORIGAMI's Dripper Air S size.
Rivers drippers can also be installed stably.

The two have the same design and are attached using magnets.

When the dripper wood guard is installed, the height between the top plate and the dripper plate is approximately 13cm.
If you use a scale placed under the coffee server, please use a scale with a thin thickness.
If you place the coffee server using the 23cm thick BRUSO scale as a reference, the distance between the dripper plate and the dripper plate is quite tight, so there is a risk of damage to the coffee server.

• isogas pedestal

The Isogas pedestal is a product designed to make it safer and more convenient to use burners, which are firearms.

When you put an isogas can with a burner attached into the lunch box body, the burner and power adjustment valve will be raised to the top of the box.
It is a size that can be used for commonly used isogas 110g and 230g gas cans.
It is made up of 2 pieces and can be attached with magnets for compact storage.

[How to install]

*When attaching the top plate to the lid, please remove the wire attached to the Stanley Lunch Box lid.
This product uses a dedicated pole stand, so no wires are required.
When attaching the top plate to the lid, the wire may come into contact with the top plate.

【component】

- This product

• Top plate x 1
• Bridge hanger x 1
• Dripper plate x 1
• Lunch box bottom pedestal x 1
• Short pole x 4
• Brass bolt x 2
• Brass nuts x 2
• Leather handle x 1
• 2 x leather straps

*The fabric partition in the photo is not for sale.

- Dripper guard & isogas pedestal

• dripper guard
• isogas pedestal

Country of Manufacture Korea Materials Birch wood, iron, brass, neodymium magnet, synthetic leather

【Notes】

• Be careful not to lose the short pole and the brass bolts and nuts for fastening.
• If you use a scale placed under the coffee server, please use a scale with a thin thickness.
  If you place the coffee server using the 23cm thick BRUSO scale as a reference, the distance between the dripper plate and the dripper plate is quite tight, so there is a risk of damage to the coffee server.